Dovpo Ember 80 Kit 사용자 설명서 - 페이지 5

{카테고리_이름} Dovpo Ember 80 Kit에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dovpo Ember 80 Kit 8 페이지.

8.2 When in Temperature Control Mode, it will display
desired temperature value on the left and real-time
temperature on the upper right corner and puf f counter
on the bottom right corner .
Desired
Temperature
9. Reset Puff Counter
Reset the puff counter by pressing the fire button 3 times
quickly. The maximum puff is 999, it will go back to 0
when max out.
10. Adjust Preheat Power
When in Temperature Control Mode, hold both fire button
and "+" for 1.5s, the wattage value on the upper right
corner will be flashing, press "+" or "-" button to adjust
preheat power .
11. The device will change back to W attage Mode when
using non-temp controlled wire in Temperature Control
Mode.
12. Automatic Mode
A recommended wattage value will be set every time a
new atomizer is attached to the device. You can still
adjust wattage after the device gives you a recommen-
ded wattage.
Automatic Mode works only with Wattage Mode.
Resistance
600
Ni
0.3Ω
0.5Ω
1.0Ω
1.5Ω
Real-time Temperature
F
120℉
009
Puff Counter
Recommened Wattage
50W
30W
16W
12W
4