Comcast X1 Panduan Memulai - Halaman 2
Jelajahi secara online atau unduh pdf Panduan Memulai untuk Kotak set-top box Comcast X1. Comcast X1 4 halaman. Reboot
Juga untuk Comcast X1: Panduan Memulai Cepat (4 halaman)
Halaman Cetak
Step 1
Plug in & power up
If you will be connecting a Wireless Gateway make sure it is installed first.
A
Screw one end of the coax cable to the
Cable In/RF In port on your set-top box.
Screw the other end to the cable wall
outlet or one of the ports on the splitter.
Make sure these connections are finger
tight.
To connect your splitter to the cable wall
!
outlet screw one end of a coax cable to the
side of the splitter with the single port and
the other end to the cable wall outlet.
B
Plug the power cord into your set-top
box. Plug the other end into an
electrical outlet.
C
Setup is different depending on if you are connecting an HDTV or a non-HDTV.
Use the appropriate option below:
For HDTVs
Plug one end of the HDMI cable to the HD
to TV port on your set-top box. Plug the
other end into an HDMI port on your TV.
Take note of which HDMI port you use on
your TV. You will reference it later.
For non-HDTVs
Screw one end of the coax cable into
the Cable Out port on your set-top box.
Screw the other end into the Cable In
coax port on your TV. Make sure these
connections are finger tight.
or