- ページ 2

セットトップボックス Comcast X1のPDF スタートマニュアルをオンラインで閲覧またはダウンロードできます。Comcast X1 4 ページ。 Reboot
Comcast X1 にも：クイック・スタート・マニュアル (4 ページ)

Step 1

Plug in & power up

If you will be connecting a Wireless Gateway make sure it is installed first.

Screw one end of the coax cable to the

Cable In/RF In port on your set-top box.

Screw the other end to the cable wall

outlet or one of the ports on the splitter.

Make sure these connections are finger

tight.

To connect your splitter to the cable wall

outlet screw one end of a coax cable to the

side of the splitter with the single port and

the other end to the cable wall outlet.

Plug the power cord into your set-top

box. Plug the other end into an

electrical outlet.

Setup is different depending on if you are connecting an HDTV or a non-HDTV.

Use the appropriate option below:

For HDTVs

Plug one end of the HDMI cable to the HD

to TV port on your set-top box. Plug the

other end into an HDMI port on your TV.

Take note of which HDMI port you use on

your TV. You will reference it later.

For non-HDTVs

Screw one end of the coax cable into

the Cable Out port on your set-top box.

Screw the other end into the Cable In

coax port on your TV. Make sure these

connections are finger tight.