Follett REF5-BB Panduan Pemasangan, Pengoperasian, dan Servis - Halaman 3
Jelajahi secara online atau unduh pdf Panduan Pemasangan, Pengoperasian, dan Servis untuk Kulkas Follett REF5-BB. Follett REF5-BB 17 halaman. Compressor retrofit kit
Juga untuk Follett REF5-BB: Spesifikasi (2 halaman), Panduan Petunjuk Instalasi (8 halaman)
Halaman Cetak
Installation
Installing legs – required
1. Remove legs from plastic bag packed inside refrigerator.
2. Tip refrigerator back and screw legs in all the way to stop (they will
extend 1/8" below base of refrigerator).
3. Adjust legs as needed to level refrigerator in both directions. To access
legs, remove the lower front panel. Turn legs clockwise to extend legs.
Chart recorder/alarm module
The chart recorder/alarm module (when ordered) is packed in the lower drawer. Use the stainless steel,
sheathed probe included in the module package in conjuction with the product simulating bottle mounted inside
the refrigerator.
Installing the probe
1. Punch hole in cap of product simulating bottle.
2. Fill bottle with glycerin or user-preferred liquid.
3. Reistall bottle in bracket.
4. From refrigerator back, route probe through gasketed port (where refrigerant line enters) and hole in backwall
evaporator cover.
5. Plug probe into back of recorder module and proceed with set up, following instructions included with chart
recorder.
Fig. 1
3