Follett REF5-BB 설치, 운영 및 서비스 매뉴얼 - 페이지 3

{카테고리_이름} Follett REF5-BB에 대한 설치, 운영 및 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Follett REF5-BB 17 페이지. Compressor retrofit kit
Follett REF5-BB에 대해서도 마찬가지입니다: 사양 (2 페이지), 설치 지침 매뉴얼 (8 페이지)

페이지 인쇄
Follett REF5-BB 설치, 운영 및 서비스 매뉴얼

Installation

Installing legs – required
1. Remove legs from plastic bag packed inside refrigerator.
2. Tip refrigerator back and screw legs in all the way to stop (they will
extend 1/8" below base of refrigerator).
3. Adjust legs as needed to level refrigerator in both directions. To access
legs, remove the lower front panel. Turn legs clockwise to extend legs.
Chart recorder/alarm module
The chart recorder/alarm module (when ordered) is packed in the lower drawer. Use the stainless steel,
sheathed probe included in the module package in conjuction with the product simulating bottle mounted inside
the refrigerator.

Installing the probe

1. Punch hole in cap of product simulating bottle.
2. Fill bottle with glycerin or user-preferred liquid.
3. Reistall bottle in bracket.
4. From refrigerator back, route probe through gasketed port (where refrigerant line enters) and hole in backwall
evaporator cover.
5. Plug probe into back of recorder module and proceed with set up, following instructions included with chart
recorder.
Fig. 1
3