Carbolite TLD Panduan Petunjuk Pemasangan, Pengoperasian & Pemeliharaan - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Petunjuk Pemasangan, Pengoperasian & Pemeliharaan untuk Oven Carbolite TLD. Carbolite TLD 12 halaman.

To switch the oven off, set the Instrument switch to O. If the oven is to be left off, isolate it from

the electrical supply.

3.3

Overtemperature Control (if fitted)

The overtemperature controller should typically be set at 15°C above the top temperature used by

the main programmer. If an overtemperature condition occurs, always investigate the possibility

that the main control system has failed.

An overtemperature condition always cuts off power to the heating elements. It is indicated by a

light in the overtemperature controller flashing. To reset the condition, either allow the oven to

cool, or increase the overtemperature setting, then follow the instructions in the manual supplied.

MF18

TLD