AMS AS5601 Manual - Halaman 6

Jelajahi secara online atau unduh pdf Manual untuk Adaptor AMS AS5601. AMS AS5601 13 halaman. Usb interface & programming box
Juga untuk AMS AS5601: Panduan Pengoperasian (12 halaman), Panduan Pengguna (13 halaman)

Halaman Cetak

AS5601 Adapter Board

5.1.2 Incremental Mode

The incremental mode is used to set up a contactless encoder knob. In addition to the incremental

output, a push button output is available to integrate a contactless push-button.

Figure 4:

Using the board in incremental mode

µC

Note: The grid and grid offset must be configured.

Note: To use the push-button functionality

AS5601 Configuration

All options to configure the AS5601 are shown below. To use the AS5601 in incremental mode for a

contactless rotary knob, the electrical signal must be aligned with the mechanical grid. As well the

push-button threshold must be configured for the mechanical setup.

6.1 Configuring the grid offset

An ideal mechanical grid and the electrical output are shown below in

The transition of electrical signal should ideally be in the middle between two mechanical positions.

ams Eval Kit Manual, Confidential

[v1-00] 2014-Jul-31

Push

Figure 5

for a 3-bit encoder.

Document Feedback

Page 6