AMS AS5601 매뉴얼 - 페이지 6

{카테고리_이름} AMS AS5601에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AMS AS5601 13 페이지. Usb interface & programming box
AMS AS5601에 대해서도 마찬가지입니다: 운영 매뉴얼 (12 페이지), 사용자 설명서 (13 페이지)

페이지 인쇄

AS5601 Adapter Board

5.1.2 Incremental Mode

The incremental mode is used to set up a contactless encoder knob. In addition to the incremental

output, a push button output is available to integrate a contactless push-button.

Figure 4:

Using the board in incremental mode

µC

Note: The grid and grid offset must be configured.

Note: To use the push-button functionality

AS5601 Configuration

All options to configure the AS5601 are shown below. To use the AS5601 in incremental mode for a

contactless rotary knob, the electrical signal must be aligned with the mechanical grid. As well the

push-button threshold must be configured for the mechanical setup.

6.1 Configuring the grid offset

An ideal mechanical grid and the electrical output are shown below in

The transition of electrical signal should ideally be in the middle between two mechanical positions.

ams Eval Kit Manual, Confidential

[v1-00] 2014-Jul-31

Push

Figure 5

for a 3-bit encoder.

Document Feedback

Page 6