AmScope TLS-S50360 Buku Petunjuk - Halaman 6
Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Teleskop AmScope TLS-S50360. AmScope TLS-S50360 17 halaman.
Halaman Cetak
REFLECTOR TELESCOPE
09
08
07
06
05
04
03
02
01
01. Tripod leg lock knob
02. Tripod spreader bar
03. Accesspry tray
04. Altitude slow motion
control cable
05. Focus knob
Phone : 1-888-950-2888 (toll free) | Fax : 949-271-4795
Our Office Hours are Monday to Friday, from 5:00am to 6:00pm Pacific Time.
www.amscope.com
9
amscope.com
© 2021 AmScope. All Rights Reserved.
10
OTA
11
MOUNT
12
13
14
TRIPOD
11. OTA lock knob
12. Bubble level
13. Azimuth control knob
14. Azimuth lock knob
6. SETTING PARTS
6.1 Tripod
•
Set up telescope where there is a clear view of the sky and the ground
is stable.
•
Fully spread the tripod legs apart and set the height of tripod by
loosening the tripod leg lock knobs so it is at the appropriate height.
•
Level the top of the tripod by adjusting the height of the three tripod
legs
•
Attach the accessory tray to the tripod by threading the tray onto the
center piece of the spreader bars.
6.2 Mount (TLS-PAZ series)
•
Unfold the mount so that it is away from the tripod.
6.3 Ocular Tube Assembly
TLS Series
•
Place the optical tube onto the saddle plate and tighten the two OTA
lock knobs to a firm feel.
•
Install the diagonal into the optical tube, and secure the diagonal by
tightening the diagonal lock knob.
•
Slide an eyepiece into the diagonal and secure the eyepiece by
tightening the diagonal lock knob.
•
Install the view finder and secure it by tightening the view finder lock
knob to a firm feel.
TLS-T Series
•
Place the optical tube onto the saddle plate and tighten the two OTA
lock knobs to a firm feel.
•
Install the diagonal into the optical tube, and secure the diagonal by
tightening the diagonal lock knob.
•
Slide an eyepiece into the diagonal and secure the eyepiece by
tightening the diagonal lock knob.
10
amscope.com