AmScope TLS-S50360 사용 설명서 - 페이지 6

{카테고리_이름} AmScope TLS-S50360에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AmScope TLS-S50360 17 페이지.

페이지 인쇄

REFLECTOR TELESCOPE

01. Tripod leg lock knob

02. Tripod spreader bar

03. Accesspry tray

04. Altitude slow motion

control cable

05. Focus knob

Phone : 1-888-950-2888 (toll free) | Fax : 949-271-4795

Our Office Hours are Monday to Friday, from 5:00am to 6:00pm Pacific Time.

www.amscope.com

amscope.com

OTA

MOUNT

TRIPOD

11. OTA lock knob

12. Bubble level

13. Azimuth control knob

14. Azimuth lock knob

6. SETTING PARTS

6.1 Tripod

•

Set up telescope where there is a clear view of the sky and the ground

is stable.

•

Fully spread the tripod legs apart and set the height of tripod by

loosening the tripod leg lock knobs so it is at the appropriate height.

•

Level the top of the tripod by adjusting the height of the three tripod

legs

•

Attach the accessory tray to the tripod by threading the tray onto the

center piece of the spreader bars.

6.2 Mount (TLS-PAZ series)

•

Unfold the mount so that it is away from the tripod.

6.3 Ocular Tube Assembly

TLS Series

•

Place the optical tube onto the saddle plate and tighten the two OTA

lock knobs to a firm feel.

•

Install the diagonal into the optical tube, and secure the diagonal by

tightening the diagonal lock knob.

•

Slide an eyepiece into the diagonal and secure the eyepiece by

tightening the diagonal lock knob.

•

Install the view finder and secure it by tightening the view finder lock

knob to a firm feel.

TLS-T Series

•

Place the optical tube onto the saddle plate and tighten the two OTA

lock knobs to a firm feel.

•

Install the diagonal into the optical tube, and secure the diagonal by

tightening the diagonal lock knob.

•

Slide an eyepiece into the diagonal and secure the eyepiece by

tightening the diagonal lock knob.

amscope.com