Electrolux Built-In Dishwasher Panduan Servis - Halaman 28

Jelajahi secara online atau unduh pdf Panduan Servis untuk Kulkas Electrolux Built-In Dishwasher. Electrolux Built-In Dishwasher 50 halaman. Built-in oven
Juga untuk Electrolux Built-In Dishwasher: Panduan Penggunaan dan Perawatan (36 halaman), Panduan Penggunaan & Perawatan (44 halaman), Panduan Petunjuk Instalasi (28 halaman), Panduan Penggunaan & Perawatan (28 halaman), Panduan Penggunaan & Perawatan (40 halaman), Panduan Penggunaan & Perawatan (27 halaman), Panduan Penggunaan & Perawatan (12 halaman), Panduan Penggunaan & Perawatan (22 halaman), Tips dan Resep (36 halaman), Panduan Petunjuk Pengoperasian (18 halaman), Panduan Pengguna Ower (21 halaman), Panduan Pengguna Ower (13 halaman), Panduan Pemilik (29 halaman), Panduan Pengguna (27 halaman), Buku Instruksi (17 halaman), Buku Instruksi (15 halaman), Buku Petunjuk (18 halaman), Buku Instruksi (27 halaman), Buku Instruksi (18 halaman)

Halaman Cetak
Electrolux Built-In Dishwasher Panduan Servis
3.

GAS OVENS

3.1. REMOVING THE BUILT-IN OVEN

IMPORTANT: Disconnect the appliance from the power supply before accessing internal
components.
Access to certain components can be gained by removing the built-in oven partially from its
compartment in the cabinet.
When the oven is partially pulled out, the engineer can access the components in the front
control panel and the electronic control unit. In order to access the other components located
in the rear section, it is necessary to remove the oven completely from the cabinet.
Proceed as follows to remove the oven:
-
Remove the four screws which secure the oven to the casing. These are located at the
front of the front panel (figg. 47 - 48).
Fig. 47.

3.2. DISCONNECTING THE OVEN FROM THE POWER SUPPLY

IMPORTANT: Before accessing any of the internal components, it is essential to disconnect
the oven from the power supply by removing the plug from the socket or by
positioning the switch on the power circuit (if any) to "OFF".
3.3

DISCONNECTING THE GAS SUPPLY

Proceed as follows to disconnect the gas supply:
1. Shut off the gas supply valve.
2. Remove the oven from the cabinet.
3. Remove the nut which secures the gas delivery
pipe to the gas coupling on the oven (see fig.
49)
1. GAS INLET COUPLING ON OVEN
2. NUT ON GAS COUPLING
3. GAS SUPPLY HOSE
4. CABINET WORKTOP
SOI 04.04 FV
Fig. 49
28/50
Fig. 48
599 35 96-40