Draper 218031 Petunjuk Perakitan

Jelajahi secara online atau unduh pdf Petunjuk Perakitan untuk Layar Proyeksi Draper 218031. Draper 218031 2 halaman. Cinefold portable projection screen, truss-style cinefold portable projection screen

Halaman Cetak

Cinefold Portable Projection Screen by Draper

① Read instructions through completely before proceeding; retain for future

reference.

② Handle viewing surface with care; do not allow it to come in contact with

sharp or dirty objects.

③ Use Handy Cranks provided; failure to do so may lead to screen damage.

④ Make sure screen is level.

⑤ Do not write on viewing surface.

⑥ The ideal temperature range for assembling folding screens to prevent

damaging the surface is 68°-78° F (20°-26° C). Assembling below

recommended temperatures may damage surface and void warranty.

Frame/Screen Assembly

① Open carrying case and remove pouch containing screen surface, and

three aluminum assemblies. The largest package is the frame. Unwrap and

unfold it completely in one direction only, locking all hinges. Frame should

lie with snaps facing up.

② Remove surface from its envelope. With male snaps at bottom, snap

surface to frame. For easier surface attachment, start in one corner, then

work your way around the frame. Make sure snaps are secure.

Please note: For steps 3-5, screen should remain on ﬂ oor or table, with

surface facing up. Carefully lift screen from ﬂ oor or table to complete each

step.

③ Lock corner braces.

④ Unfold leg assemblies and lock hinges. Check that ad just ment knob is in

the hole desired (upper for vertical screen position, lower for keystone

elimination). DO NOT unfold feet at this time.

⑤ Attach legs to back side of vertical frame sections, as indicated by the

color coded markings, using Handy Cranks. For standard screen height,

match colored tapes exactly. Height is adjustable in 6" increments.

⑥ Raise Cinefold to a vertical position and unfold feet. Tighten ad just ment

knobs to maintain legs at desired angle. If your screen includes Heavy-

Duty Legs, unfold and lock the extensions on the backs of the feet, hinge

up to the backs of the leg, and attach with Handy Crank.

⑦ If Anti-Sway stabilizers are supplied with your screen, refer to illustration

and attach with Handy Cranks.

Caution: Beware

of pinch points.

A Note About Surfaces

① Always fold with snaps face-to-face. Do not permit screen fabric to

contact border material or snaps when folded. Store in pouch

provided.

② Take care at all times not to permit Cinefold viewing surface to contact any

dusty or dirty area, nor any varnished or painted object.

③ When necessary, clean Cinefold viewing surface according to cleaning

instructions for the particular surface you are using.

Form Cinefold_Inst12

Assembly Instructions

Caution

Printed in U.S.A.

Frame

Handy

Crank

Standard

T-Leg

Anti-sway stabilizers

optional with HD legs

Warning: This product is intended for indoor use only. Failure to

follow warning may result in product damage or personal injury due to

unforeseen acts of nature.

Caution: Make sure all hinges and joints are locked

before raising screen to standing position.

Caution: Make sure screen

is placed on level surface.

Frame

Handy Crank

Standard T-Leg

Heavy duty legs optional

Hinges and

hinge locks

2" Min.

44" Max.

Adjustment

Knob

Snaps

Viewing

Surface

Bottom row of snap

studs to accept skirt

Viewing

Surface