Draper StormForce PT141KSF Petunjuk Manual - Halaman 12
Jelajahi secara online atau unduh pdf Petunjuk Manual untuk Alat Listrik Draper StormForce PT141KSF. Draper StormForce PT141KSF 16 halaman. Rotary multi-tool kit
Halaman Cetak
8.
BASIC MULTI-TOOL OPERATIONS
8.5
FITTING A CUTTING/SANDING DISC -
FIG. 5
With the disc holder
using the plain slot screwdriver
spanner handle tip). Leave one fibre washer on the
screw, place the cutting disc on the screw and fit the
second fibre washer, refit to the disc holder spindle.
(Do not over tighten).
8.6
FITTING THE SANDING DRUMS - FIG. 6
To fit a drum
, firstly loosen the small screw in the
top of the holder
relax. Slide the sanding drum onto the holder. To secure
simply tighten the screw and the rubber drum will swell,
gripping the drum. (Do not over tighten).
WARNING: Excessive force on this machine will cause
the motor to overheat and fail. This is not covered by
the guarantee.
12
in the chuck, remove the screw
(incorporated in the
. This will allow the rubber to
FIG.5
FIG.6