Draper StormForce PT141KSF Talimatlar Kılavuzu - Sayfa 12
Elektrikli Alet Draper StormForce PT141KSF için çevrimiçi göz atın veya pdf Talimatlar Kılavuzu indirin. Draper StormForce PT141KSF 16 sayfaları. Rotary multi-tool kit
Sayfayı Yazdır
8.
BASIC MULTI-TOOL OPERATIONS
8.5
FITTING A CUTTING/SANDING DISC -
FIG. 5
With the disc holder
using the plain slot screwdriver
spanner handle tip). Leave one fibre washer on the
screw, place the cutting disc on the screw and fit the
second fibre washer, refit to the disc holder spindle.
(Do not over tighten).
8.6
FITTING THE SANDING DRUMS - FIG. 6
To fit a drum
, firstly loosen the small screw in the
top of the holder
relax. Slide the sanding drum onto the holder. To secure
simply tighten the screw and the rubber drum will swell,
gripping the drum. (Do not over tighten).
WARNING: Excessive force on this machine will cause
the motor to overheat and fail. This is not covered by
the guarantee.
12
in the chuck, remove the screw
(incorporated in the
. This will allow the rubber to
FIG.5
FIG.6