Draper FlexShade Petunjuk Pemasangan & Pengoperasian - Halaman 4

Jelajahi secara online atau unduh pdf Petunjuk Pemasangan & Pengoperasian untuk Perabotan Dalam Ruangan Draper FlexShade. Draper FlexShade 12 halaman. Exterior clutch-operated shade
Juga untuk Draper FlexShade: Panduan Pemasangan & Pengoperasian (8 halaman), Petunjuk Instalasi (2 halaman), Petunjuk Manual (12 halaman), Petunjuk Pemasangan & Pengoperasian (11 halaman), Petunjuk Pemasangan & Pengoperasian (12 halaman), Petunjuk Pemasangan & Pengoperasian (16 halaman), Petunjuk Pemasangan & Pengoperasian (4 halaman), Petunjuk Manual (7 halaman), Petunjuk Pemasangan & Pengoperasian (16 halaman)

Halaman Cetak
Draper FlexShade Petunjuk Pemasangan & Pengoperasian
Exterior Clutch-Operated FlexShade

Section 2 - BRACKET INSTALLATION: Installing Cable Guides

Caution: Before mounting shades, verify measurements
on label provided with shade, and ensure unit is
installed at correct width.
Please Note: Installer is responsible for selecting mounting
hardware appropriate for site conditions.
1.
Install Cable Mounting Bracket
using appropriate fasteners.
3.
Place washer and nut
approximately halfway
up threads of bolted
end of cable to allow
space for travel.
4.
Pull cable up,
through Cable
Clamp on
Shade Bracket.
( Wall mount option
shown.)
5.
Pull cable taut and mark
cable under Cable Clamp.
(Wall mount option shown.)
Mark
®
2.
Loosen screw in Cable
Clamp, and place into
the middle hole of Shade
Bracket
(from outside of
.
bracket)
6.
Undo washer and
nut, and pull cable
up to allow for
working clearance.
(Deck mount option
shown).
page 4 of 12
7.
Strip cable
to mark.