Draper FlexShade Instructions Installation & Operation - Page 4

Browse online or download pdf Instructions Installation & Operation for Indoor Furnishing Draper FlexShade. Draper FlexShade 12 pages. Exterior clutch-operated shade
Also for Draper FlexShade: Installation & Operation Manual (8 pages), Installation Instructions (2 pages), Instructions Manual (12 pages), Installation & Operation Instructions (11 pages), Instructions Installation & Operation (12 pages), Instructions Installation & Operation (16 pages), Instructions Installation & Operation (4 pages), Instructions Manual (7 pages), Instructions Installation & Operation (16 pages)

Print Page
Draper FlexShade Instructions Installation & Operation
Exterior Clutch-Operated FlexShade

Section 2 - BRACKET INSTALLATION: Installing Cable Guides

Caution: Before mounting shades, verify measurements
on label provided with shade, and ensure unit is
installed at correct width.
Please Note: Installer is responsible for selecting mounting
hardware appropriate for site conditions.
1.
Install Cable Mounting Bracket
using appropriate fasteners.
3.
Place washer and nut
approximately halfway
up threads of bolted
end of cable to allow
space for travel.
4.
Pull cable up,
through Cable
Clamp on
Shade Bracket.
( Wall mount option
shown.)
5.
Pull cable taut and mark
cable under Cable Clamp.
(Wall mount option shown.)
Mark
®
2.
Loosen screw in Cable
Clamp, and place into
the middle hole of Shade
Bracket
(from outside of
.
bracket)
6.
Undo washer and
nut, and pull cable
up to allow for
working clearance.
(Deck mount option
shown).
page 4 of 12
7.
Strip cable
to mark.