Bosch WIA24201GC Buku Petunjuk dan Petunjuk Instalasi - Halaman 14
Jelajahi secara online atau unduh pdf Buku Petunjuk dan Petunjuk Instalasi untuk Mesin cuci Bosch WIA24201GC. Bosch WIA24201GC 32 halaman. Fully integrated built-in washing machine with time-delay function
Halaman Cetak
Washing options
Z Water plus button
Temp. °C button
s
0 Extra Spin button
Rinsestop
Unbalanced load detection
system
3 Delay Start button
Start/Pause button
Programme progress
Increased water level during the washing and rinsing cycle. For areas
with very soft water or to further improve the washing result.
The lamp lights up if Z Water plus was selected.
The temperature can be individually adjusted for each programme.
To set the temperature, press the s Temp. °C repeatedly until the
required temperature is displayed.
The spin speed can be individually adjusted for each programme.
To set the spin speed, press the 0 Extra Spin button repeatedly until the
required spin speed is displayed.
If Rinse stop is desired, the spin speed is reduced to 0 rpm. The laundry
remains in the last rinsing water. Appropriate for delicate fabrics and
curtains page 15.
The automatic unbalanced load detection system ensures even distribu-
tion of the laundry by starting to spin several times. If the laundry is
extremely unevenly distributed, the speed of the final spin is reduced or
the spin cycle is not performed for safety reasons.
You can delay the start of the programme before it begins. Using the re-
maining time, you can determine when the selected programme is to end.
The remaining time can be set in increments of one hour up to a maxi-
mum of 24 hours.
Press the 3 Delay Start button repeatedly until the required number of
hours is displayed.
Then press the Start/ Pause button; the start of the programme is delayed
according to the remaining time set. The time remaining until the end of
the programme is shown in the display panel.
Door is locked during delay time.
Press Start/Pause to start the selected programme.
The programme progress is shown using illuminated indicator lamps:
> (Ready)
N (Wash)
– After switching on the washing machine, the N (Wash) (>) indicator
lamp flashes.
– When the programme starts, N (Wash) lights up permanently.
O (Rinse)
– Lamp lights up permanently during the rinsing cycle.
– Rinse stop selected: all indicator lamps are switched off.
0 (Spin)
– Lights are on permanently during the spin cycle.
– When spinning finishes, 0 (Spin) (?) flashes.
? (End)
– "Ÿš appears in the display panel.
14