Bosch WIA24201GC Buku Petunjuk dan Petunjuk Instalasi - Halaman 15

Jelajahi secara online atau unduh pdf Buku Petunjuk dan Petunjuk Instalasi untuk Mesin cuci Bosch WIA24201GC. Bosch WIA24201GC 32 halaman. Fully integrated built-in washing machine with time-delay function

Halaman Cetak

Bosch WIA24201GC Buku Petunjuk dan Petunjuk Instalasi

1. Programmes

Washing

End of programme

Changing the programme

 Turn the programme selector to the desired programme,

e.g. ic Cottons 60°C.

 The N (Wash) (>) indicator lamp flashes

 Change the spin speed or Rinse stop ( page 14) and temperature if

required.

 Load the laundry  page 9.

– Observe the maximum load,

 Press the Start/Pause button.

– The washing programme starts.

– The N (Wash) indicator lamp lights up.

The washing programmes are ended automatically. "Ÿš appears in the

display panel.

 Turn the programme selector to Off .

 Remove the washing from the drum.

 Leave the washing machine door open so that the inside of the

washing machine can dry.

 Turn off the tap.

If the spin function was deactivated at the start of the wash cycle,

Rinsestop

(no final spin = laundry remains in last rinsing water), the washing pro-

gramme is automatically stopped after the final rinse. The display panel

shows †¥‹˜ alternating with

In order to empty the rinsing water and, if required, spin the laundry:

Press the

The water is emptying; the washing machine is in spin cycle. The

programme has ended when ‹‹‹‹ appears in the display panel.

The maximum spin speed depends on the selected washing programme.

If you do not wish to spin the laundry:

 Set the programme selector to Empty [. The water is emptying and

the washing machine is not in spin cycle. The programme has ended

when "Ÿš appears in the display panel.

 Turn the programme selector to Off.

 Remove the laundry.

 Leave the washing machine door open so that the inside of the

washing machine can dry.

You have selected the wrong programme by mistake:

 Reselect the programme. ˜'—† appears in the display panel.

 Press Start/Pause. The new programme starts from the beginning.

Programme table  page 28.

(Spin) button repeatedly until the desired spin speed is set.