Electrolux 300 Series Panduan Penggunaan & Perawatan - Halaman 37
Jelajahi secara online atau unduh pdf Panduan Penggunaan & Perawatan untuk Mesin cuci Electrolux 300 Series. Electrolux 300 Series 46 halaman. Front load dryer
Juga untuk Electrolux 300 Series: Panduan Pemilik (11 halaman), Panduan Penggunaan & Perawatan (39 halaman), Panduan Petunjuk Instalasi (50 halaman), Panduan Penggunaan & Perawatan (28 halaman)
Halaman Cetak
STEPS
TIPS
4. Select the
• See Cycle Selection and Cycle Settings for
appropriate
detailed descriptions of cycle controls.
cycle and
• See Cycle Setting Charts to determine which
settings for
settings are available for each cycle.
each load.
• To provide the best care, not every setting
or option is available with every cycle. If a
setting or option is not available for the cycle
selected, the indicator will not light. See
Setting Chart for information of available
options for each cycle by model.
• Adjustments made to most cycle settings will
be remembered and recalled each time that
cycle is selected in the future. To return to
factory settings, press the dryness button
and the options button at the same time
and hold until the signal sounds.
5. Close the
• To start the drying cycle, close the door and
dryer door
press the start/pause button.
and start
• To add an item to the dryer drum, press
the drying
start/pause. Add the item, close the door
cycle.
and press start/pause to resume the cycle.
• To change settings or options after the cycle
has begun, press start/pause, change the
settings, and then press start/pause. If the
cycle is not paused first, the unit will emit
several beeps when the buttons are pressed
but no changes to the cycle will be applied.
• To change the cycle once the cycle has
begun, press cancel to cancel the cycle,
select the new cycle, and press start/pause
to begin the new cycle. Changing a cycle
selection without cancelling the current WILL
NOT change the cycle.
• To cancel a cycle, press cancel.
6. Remove
• A signal will sound at the end of the cycle if
items when
the chime option is not set to mute.
done.
• Immediately remove items when the cycle is
completed and hang or fold.
• See Care and Cleaning section of this
7. Clean the
lint filter.
instruction.
• CLEAN LINT will be displayed at the end of
the cycle as a reminder to remove lint from
filter.
Operating Instructions
To return to factory settings,
press the dry level/dryness and
options buttons at the same time
and hold until the signal sounds.
IMPORTANT
Over-drying can
cause wrinkles,
shrinkage, lint,
harshness, and a
build up of static
electricity.
To prevent
unintentional and
accidental exposure
of delicate material
to excess heat
or unexpected
steam, the sanitize
temperature setting
and the perfect
steam™ option will
not be remembered
and must be
reselected each time.
The dryer WILL NOT
operate with the door
open.
When drying a single
large or bulky item,
such as a comforter,
pause the cycle part
way through to turn
the item "inside out"
and maximize drying
effectiveness.
See product
manufacturer's
instructions.
ALWAYS REMOVE
LINT at the end
of the cycle
(see warning on
previous page).
37