Electrolux 300 Series Use & Care Manual - Page 37

Browse online or download pdf Use & Care Manual for Washer Electrolux 300 Series. Electrolux 300 Series 46 pages. Front load dryer
Also for Electrolux 300 Series: Owner's Manual (11 pages), Use & Care Manual (39 pages), Installation Instructions Manual (50 pages), Use & Care Manual (28 pages)

Print Page

STEPS

TIPS

4. Select the

• See Cycle Selection and Cycle Settings for

appropriate

detailed descriptions of cycle controls.

cycle and

• See Cycle Setting Charts to determine which

settings for

settings are available for each cycle.

each load.

• To provide the best care, not every setting

or option is available with every cycle. If a

setting or option is not available for the cycle

selected, the indicator will not light. See

Setting Chart for information of available

options for each cycle by model.

• Adjustments made to most cycle settings will

be remembered and recalled each time that

cycle is selected in the future. To return to

factory settings, press the dryness button

and the options button at the same time

and hold until the signal sounds.

5. Close the

• To start the drying cycle, close the door and

dryer door

press the start/pause button.

and start

• To add an item to the dryer drum, press

the drying

start/pause. Add the item, close the door

cycle.

and press start/pause to resume the cycle.

• To change settings or options after the cycle

has begun, press start/pause, change the

settings, and then press start/pause. If the

cycle is not paused first, the unit will emit

several beeps when the buttons are pressed

but no changes to the cycle will be applied.

• To change the cycle once the cycle has

begun, press cancel to cancel the cycle,

select the new cycle, and press start/pause

to begin the new cycle. Changing a cycle

selection without cancelling the current WILL

NOT change the cycle.

• To cancel a cycle, press cancel.

6. Remove

• A signal will sound at the end of the cycle if

items when

the chime option is not set to mute.

done.

• Immediately remove items when the cycle is

completed and hang or fold.

• See Care and Cleaning section of this

7. Clean the

lint filter.

instruction.

• CLEAN LINT will be displayed at the end of

the cycle as a reminder to remove lint from

filter.

Operating Instructions

To return to factory settings,

press the dry level/dryness and

options buttons at the same time

and hold until the signal sounds.

IMPORTANT

Over-drying can

cause wrinkles,

shrinkage, lint,

harshness, and a

build up of static

electricity.

To prevent

unintentional and

accidental exposure

of delicate material

to excess heat

or unexpected

steam, the sanitize

temperature setting

and the perfect

steam™ option will

not be remembered

and must be

reselected each time.

The dryer WILL NOT

operate with the door

open.

When drying a single

large or bulky item,

such as a comforter,

pause the cycle part

way through to turn

the item "inside out"

and maximize drying

effectiveness.

See product

manufacturer's

instructions.

ALWAYS REMOVE

LINT at the end

of the cycle

(see warning on

previous page).