Alemlube 950 Panduan Pemilik

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Pompa Air Alemlube 950. Alemlube 950 2 halaman. Lever action poly drum pump

Halaman Cetak
Description
Model 950 is a heavy-duty lever action pump designed for the transfer of light Chemicals & Solvents. The pump is made
from polypropylene & is lightweight at 1.5kg. It is self priming, discharges on the down stroke, has 360° alignment
versatility with locking ring, anti drip nozzle, & telescopic up-take pipe to suit 60 or 205 Litre Drums & storage tanks to
900mm (36") depth. Discharge is approximately 1/3 litre per stroke. 950-20 suitable for 20 litre drums. 950-V available
with Viton seals. 950V is for use with more aggressive chemicals that are compatible with Viton seals.

Specifications

Uses
Discharge Quantity
Materials
Weight
Assembly instructions
1 Suction Tube
Connect the pump body to the telescopic suction tube by threading together.
Being sure to use Teflon Tape (provided) for the thread connections.
Note: All connections must be air tight for the pump to create suction & operate
correctly.

Operating Instructions

1 Ensure that suction tube is fully extended and that all thread connections are
air tight.
2 With the aid of the bung adaptor, connect the pump to the 20, 60 or 205lt drum.
3 If pump is then aligned not as required, adjust 360° alignment fitting to enable
pump to operate in required position.
4 Action the pump lever until you feel that the pump body is primed and after two or
three further actions of the lever, liquid being transferred will appear at the pump
outlet.
5 When you have finished transferring product, to ensure a long working life for your
pump, please ensure that all liquid in the pump body is pumped through and out
of the pump body into a smaller drum or back into the main drum.
Failure to do will result in piston, valve and piston shaft being bathed in aggressive
liquid which may cause pump to fail when you next go to use it.
Important to note:
Before pumping, always consult the parts list included to verify that each component is
compatible with the chemical being pumped. A chemical compatibility list is available
from your drum pump supplier or Alemlube.
NSW
QLD/PNG
TEL: (02) 9939 0711
TEL: (07) 3889 8480
FAX: (02) 9939 0411
FAX: (07) 3889 8490
Visit our website at
OWNER'S MANUAL
Lever Action Poly Drum Pump
Mild acids, alkalis, oils, solvents, etc from 60L or 205L drums. Check compatibility charts.
1/3 litre per stroke
Polypropylene / polyethylene piston and valves / Nitrile Seals OR Viton Seals (950-V)
1.5kg
VIC/TAS
TEL: (03) 8787 8288
FAX: (03) 8787 8266
www.alemlube.com.au
WA
SA/NT
TEL: (08) 9209 3066
TEL: (08) 8241 7111
FAX: (08) 9209 3933
FAX: (08) 8241 7011
950
NZ
TEL: (09) 447 1007
FAX: (09) 447 1008