Alemlube 950 소유자 매뉴얼

{카테고리_이름} Alemlube 950에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Alemlube 950 2 페이지. Lever action poly drum pump

Description

Model 950 is a heavy-duty lever action pump designed for the transfer of light Chemicals & Solvents. The pump is made

from polypropylene & is lightweight at 1.5kg. It is self priming, discharges on the down stroke, has 360° alignment

versatility with locking ring, anti drip nozzle, & telescopic up-take pipe to suit 60 or 205 Litre Drums & storage tanks to

900mm (36") depth. Discharge is approximately 1/3 litre per stroke. 950-20 suitable for 20 litre drums. 950-V available

with Viton seals. 950V is for use with more aggressive chemicals that are compatible with Viton seals.

Specifications

Uses

Discharge Quantity

Materials

Weight

Assembly instructions

1 Suction Tube

Connect the pump body to the telescopic suction tube by threading together.

Being sure to use Teflon Tape (provided) for the thread connections.

Note: All connections must be air tight for the pump to create suction & operate

correctly.

Operating Instructions

1 Ensure that suction tube is fully extended and that all thread connections are

air tight.

2 With the aid of the bung adaptor, connect the pump to the 20, 60 or 205lt drum.

3 If pump is then aligned not as required, adjust 360° alignment fitting to enable

pump to operate in required position.

4 Action the pump lever until you feel that the pump body is primed and after two or

three further actions of the lever, liquid being transferred will appear at the pump

outlet.

5 When you have finished transferring product, to ensure a long working life for your

pump, please ensure that all liquid in the pump body is pumped through and out

of the pump body into a smaller drum or back into the main drum.

Failure to do will result in piston, valve and piston shaft being bathed in aggressive

liquid which may cause pump to fail when you next go to use it.

Important to note:

Before pumping, always consult the parts list included to verify that each component is

compatible with the chemical being pumped. A chemical compatibility list is available

from your drum pump supplier or Alemlube.

NSW

QLD/PNG

TEL: (02) 9939 0711

TEL: (07) 3889 8480

FAX: (02) 9939 0411

FAX: (07) 3889 8490

Visit our website at

OWNER'S MANUAL

Lever Action Poly Drum Pump

Mild acids, alkalis, oils, solvents, etc from 60L or 205L drums. Check compatibility charts.

1/3 litre per stroke

Polypropylene / polyethylene piston and valves / Nitrile Seals OR Viton Seals (950-V)

1.5kg

VIC/TAS

TEL: (03) 8787 8288

FAX: (03) 8787 8266

www.alemlube.com.au

SA/NT

TEL: (08) 9209 3066

TEL: (08) 8241 7111

FAX: (08) 9209 3933

FAX: (08) 8241 7011

Email - [email protected]

950

TEL: (09) 447 1007

FAX: (09) 447 1008