Drazice OKC 200 NTRR / BP Panduan Pengoperasian dan Pemasangan - Halaman 18

Jelajahi secara online atau unduh pdf Panduan Pengoperasian dan Pemasangan untuk Ketel uap Drazice OKC 200 NTRR / BP. Drazice OKC 200 NTRR / BP 20 halaman. Stationary water heaters
Juga untuk Drazice OKC 200 NTRR / BP: Panduan Pengoperasian dan Pemasangan (17 halaman), Panduan Pengoperasian dan Pemasangan (12 halaman), Panduan Pengoperasian dan Pemasangan (19 halaman), Panduan Pengoperasian dan Pemasangan (20 halaman), Panduan Pengoperasian dan Pemasangan (18 halaman), Panduan Pengoperasian dan Instalasi (20 halaman), Panduan Pengoperasian dan Pemasangan (18 halaman), Panduan Pengoperasian dan Instalasi (13 halaman)

Halaman Cetak
Drazice OKC 200 NTRR / BP Panduan Pengoperasian dan Pemasangan
Thermostat knob

3.1.2 TEMPEATURE SETTING

Water temperature is set by turning the thermostat knob. The desired symbol is adjusted against the fixed
point on the control panel - Figure 8.
Lower temperature range
limit (about 5°C)
Fixed point on the control
panel
"Anti-freezing" temperature
(about 8°C)
Adjusting the thermostat selector at the left backstop does not mean permanent shutoff of
the heating element. When the heater is in use without blocking the daily rate, we do not
recommend the temperature to be set above 65°C. The maximum value to select is "60".

3.1.3 LIMITING THE REGULATION RANGE; LOCKED SETTINGS

For various safety reasons (unintentional scalding, preventing children or unauthorised person from
handling), the regulation range can be limited, or the setting on the thermostat blocked (Figure 9).
Electric circuit closing indicator lamp
Figure 7
Figure 8
Regulation limited
Tipping plastic guard
Upper temperature range
limit (about 74°C)
"Ideal" temperature
(about 60°C)
To block the setting
- 18 -