Alentec & Orion 24702 Panduan Pengguna - Halaman 3
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Alat Ukur Alentec & Orion 24702. Alentec & Orion 24702 8 halaman. Hose end meter pre set version
Manual 24702_EN_2B
2.
Activation
When the battery is mounted, activate the Meter by pressing the RESET & SELECT buttons simultaneously for a few
seconds. The display will light up.
When the Meter is activated, the display will show 0.00 L.
Functions
3.
Use the SELECT button to toggle the functions of the Meter
The TRIP function can be used to keep track of dispensed volume
over a certain period of time. The TRIP function can be reset
when shown on the display.
The display will always automatically return to show the actual
dispensed volume after approx. four seconds.
NOTE! The TRIP and TOTAL counters always show when volume in US
gallon(G) even when Batch volume counter is set to show pints, quarts or
gallons. The TOTAL counter can not be reset.
L
PRE-SET
Dispensed
mode
volume
indicator
Low 9V
battery
indicator
TOTAL mode indicator
L
10 sec
L
L
TRIP mode indicator
UNIT OF
MEASURE
L
indicator
See separate
instruction on page 4
L
3(8)