Carmanah SpeedCheck-15 Instal Manual - Halaman 10

Jelajahi secara online atau unduh pdf Instal Manual untuk Radar Carmanah SpeedCheck-15. Carmanah SpeedCheck-15 18 halaman. External radar kit
Juga untuk Carmanah SpeedCheck-15: Manual Penggantian (14 halaman), Manual Penggantian (11 halaman), Manual Penggantian Pintu Kabinet (10 halaman), Manual (16 halaman), Instal Manual (12 halaman)

3. Fish the Ethernet cable (not included) to the back panel assembly and plug it into the converter. Connect

the other end to your laptop. If necessary, use the second 3/4" conduit opening to route the Ethernet

cable to the converter. This cable will eventually be connected to your network switch.

4. Reinstall the back panel assembly to the SPEEDCHECK-18 sign. Ensure nothing gets pinched in the

gasket. Tighten the four screws firmly.

5. Turn on the breaker or reinstall the fuse in the power cabinet.

6. Wait for vehicle traffic to activate the system to ensure the radar is working properly.

7. See

Section 4

to configure the converter. Once configuration is completed, disconnect the Ethernet cable

from your laptop and connect it to your network switch.

8. See

Section 5

if the sign requires programming via SpeedCheck Manager.

a. SpeedCheck Manager can be downloaded at support.carmanah.com.

Ethernet cable to network (not provided)

Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 |

Serial to Ethernet converter

Hole plug for second conduit opening

SERIAL TO ETHERNET INSTALL GUIDE

3.0 INSTALLATION

carmanah.com