Carmanah G Series Manual - Halaman 8

Jelajahi secara online atau unduh pdf Manual untuk Sistem Keamanan Carmanah G Series. Carmanah G Series 10 halaman. Rrfb mast arm kit
Juga untuk Carmanah G Series: Panduan Memulai Cepat (16 halaman), Manual (11 halaman), Manual Penggantian Sistem Manajemen Energi (12 halaman), Manual Penggantian Pintu Kabinet (10 halaman), Manual (9 halaman), Panduan Pengguna (18 halaman), Instal Manual (14 halaman), Manual (10 halaman), Instal Manual (18 halaman)

Carmanah G Series Manual
3.2
G Series – Arch AC-DC Power Supply Replacement
Circuit
breaker
1. Access the inside of the power cabinet and switch the circuit breaker to the off position. It is also
recommended to disconnect the AC power source coming into the cabinet if possible.
2. Remove input and output wiring from the existing power supply and set aside to reuse. The green ground
wire is to be disconnected from the bus bar and discarded.
3. Remove the two mounting screws and set aside, these will not be reused. Remove existing AC-DC power
supply.
4. The new power supply is a smaller than the previous version, so the existing threaded PEM standoffs will
not be able to be reused – new mounting holes must be drilled.
a. Drill two new holes in the mounting plate using a #30 drill bit to attach the new power supply. Use
the provided 2x #4-40 screws and nuts to secure it in place. Do not drill through the rear of the
cabinet. Note the orientation of the power supply with the DC output facing up in the cabinet.
Either set of diagonal mounting holes may be used.
5. Reinstall the input (AC) and output (DC) wiring harnesses removed from step 2. Ensure the AC wiring is
terminated at the terminals labelled as AC/N (white wire) and AC/L (black wire).
6. Reconnect the AC power source and switch the circuit breaker to the on position in the cabinet. Once the
Energy Management System (EMS) has powered up you can test the system with the input method
installed.
a. Note - 24/7 warning systems will begin flashing immediately.
Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 |
AC-DC POWER SUPPLY REPLACEMENT GUIDE
DC output
AC-DC power
supply
AC input
8
|
carmanah.com