Carmanah G Series Manual - Página 8

Procurar online ou descarregar pdf Manual para Sistema de segurança Carmanah G Series. Carmanah G Series 10 páginas. Rrfb mast arm kit
Também para Carmanah G Series: Manual de início rápido (16 páginas), Manual (11 páginas), Manual de substituição do sistema de gestão de energia (12 páginas), Manual de substituição de portas de armários (10 páginas), Manual (9 páginas), Manual do utilizador (18 páginas), Manual de instalação (14 páginas), Manual (10 páginas), Manual de instalação (18 páginas)

3.2

G Series – Arch AC-DC Power Supply Replacement

Circuit

breaker

1. Access the inside of the power cabinet and switch the circuit breaker to the off position. It is also

recommended to disconnect the AC power source coming into the cabinet if possible.

2. Remove input and output wiring from the existing power supply and set aside to reuse. The green ground

wire is to be disconnected from the bus bar and discarded.

3. Remove the two mounting screws and set aside, these will not be reused. Remove existing AC-DC power

supply.

4. The new power supply is a smaller than the previous version, so the existing threaded PEM standoffs will

not be able to be reused – new mounting holes must be drilled.

a. Drill two new holes in the mounting plate using a #30 drill bit to attach the new power supply. Use

the provided 2x #4-40 screws and nuts to secure it in place. Do not drill through the rear of the

cabinet. Note the orientation of the power supply with the DC output facing up in the cabinet.

Either set of diagonal mounting holes may be used.

5. Reinstall the input (AC) and output (DC) wiring harnesses removed from step 2. Ensure the AC wiring is

terminated at the terminals labelled as AC/N (white wire) and AC/L (black wire).

6. Reconnect the AC power source and switch the circuit breaker to the on position in the cabinet. Once the

Energy Management System (EMS) has powered up you can test the system with the input method

installed.

a. Note - 24/7 warning systems will begin flashing immediately.

Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 |

AC-DC POWER SUPPLY REPLACEMENT GUIDE

DC output

AC-DC power

supply

AC input

carmanah.com