Carmanah R820-G Manual - Halaman 5

Jelajahi secara online atau unduh pdf Manual untuk Sistem Keamanan Carmanah R820-G. Carmanah R820-G 10 halaman. Cabinet-based systems
Juga untuk Carmanah R820-G: Panduan Memulai Cepat (16 halaman), Manual (11 halaman), Manual Penggantian Sistem Manajemen Energi (12 halaman), Manual Penggantian Pintu Kabinet (10 halaman), Manual (9 halaman), Instal Manual (14 halaman), Manual (10 halaman), Manual (10 halaman)

2.0 System Components

The retrofit kit includes:

Door switch and harness (1)

•

Standoffs (2)

•

Cap screws, pin-in hex, #10-32 (2)

•

Cap screws, Phillips pan head, #10-32 (2)

•

Washer, flat, #10 (4)

•

Washer, lock, #10 (2)

Cable ties (4)

•

Cable tie bases (2)

•

This guide is for installing the cabinet door switch retrofit kit into one of the following compatible Carmanah

systems:

•

G Series – SC315-G, R820-G, R247-G, R829-G

This retrofit is for systems that contain an Applied Information (AI) remote monitoring solution.

Refer to the individual product user manual for more details at support.carmanah.com. There are many different

options available for the G Series cabinet so your product may look different than shown throughout this guide.

The cabinet door switch retrofit kit is intended to be installed into an existing Applied Information (AI) installation

for monitoring the cabinet door position status using the Glance portal.

Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 |

CABINET DOOR SWITCH RETROFIT GUIDE

carmanah.com