Carmanah R820-G 매뉴얼 - 페이지 5

{카테고리_이름} Carmanah R820-G에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Carmanah R820-G 10 페이지. Cabinet-based systems
Carmanah R820-G에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (16 페이지), 매뉴얼 (11 페이지), 에너지 관리 시스템 교체 매뉴얼 (12 페이지), 캐비닛 도어 교체 매뉴얼 (10 페이지), 매뉴얼 (9 페이지), 설치 매뉴얼 (14 페이지), 매뉴얼 (10 페이지), 매뉴얼 (10 페이지)

2.0 System Components

The retrofit kit includes:

Door switch and harness (1)

•

Standoffs (2)

•

Cap screws, pin-in hex, #10-32 (2)

•

Cap screws, Phillips pan head, #10-32 (2)

•

Washer, flat, #10 (4)

•

Washer, lock, #10 (2)

Cable ties (4)

•

Cable tie bases (2)

•

This guide is for installing the cabinet door switch retrofit kit into one of the following compatible Carmanah

systems:

•

G Series – SC315-G, R820-G, R247-G, R829-G

This retrofit is for systems that contain an Applied Information (AI) remote monitoring solution.

Refer to the individual product user manual for more details at support.carmanah.com. There are many different

options available for the G Series cabinet so your product may look different than shown throughout this guide.

The cabinet door switch retrofit kit is intended to be installed into an existing Applied Information (AI) installation

for monitoring the cabinet door position status using the Glance portal.

Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 |

CABINET DOOR SWITCH RETROFIT GUIDE

carmanah.com