Carmanah MX Series Instal Manual - Halaman 10

Jelajahi secara online atau unduh pdf Instal Manual untuk Panel surya Carmanah MX Series. Carmanah MX Series 20 halaman. Radar detection kit
Juga untuk Carmanah MX Series: Instal Manual (2 halaman), Instal Manual (2 halaman), Manual Penggantian (4 halaman), Manual Penggantian (2 halaman), Manual Penggantian (4 halaman), Manual Penggantian (2 halaman)

Halaman Cetak
For MX 100, MX 200 and MX 400, fasten the radar cable to the two slots on the interface PCB and again to a
strain relief feature on the enclosure as shown.
MX 100
MX 400
The radar module is configured from the factory to trigger an activation whenever an oncoming vehicle is detected
approaching at a speed of at least 5 mph. Changes from the default settings are often unnecessary. Reasons for
changing the radar's configuration include:
•
To change the detection speed limits (the minimum and maximum speeds that will trigger an activation)
To increase or decrease the sensitivity of the radar module
•
•
You've ordered the Advanced Statistics option and wish to configure data logging options or read traffic
statistics from the radar module
To configure the radar module for a less common application (e.g., a radar-activated minimum speed
•
sign)
If it is necessary to configure the radar module, see
Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 |
RADAR DETECTION KIT INSTALL GUIDE
MX 200
Section
4.
LEVEL 4
10
|
carmanah.com