Carmanah MX Series 설치 매뉴얼 - 페이지 10
{카테고리_이름} Carmanah MX Series에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Carmanah MX Series 20 페이지. Radar detection kit
Carmanah MX Series에 대해서도 마찬가지입니다: 설치 매뉴얼 (2 페이지), 설치 매뉴얼 (2 페이지), 교체 매뉴얼 (4 페이지), 교체 매뉴얼 (2 페이지), 교체 매뉴얼 (4 페이지), 교체 매뉴얼 (2 페이지)
페이지 인쇄For MX 100, MX 200 and MX 400, fasten the radar cable to the two slots on the interface PCB and again to a
strain relief feature on the enclosure as shown.
MX 100
MX 400
The radar module is configured from the factory to trigger an activation whenever an oncoming vehicle is detected
approaching at a speed of at least 5 mph. Changes from the default settings are often unnecessary. Reasons for
changing the radar's configuration include:
•
To change the detection speed limits (the minimum and maximum speeds that will trigger an activation)
To increase or decrease the sensitivity of the radar module
•
•
You've ordered the Advanced Statistics option and wish to configure data logging options or read traffic
statistics from the radar module
To configure the radar module for a less common application (e.g., a radar-activated minimum speed
•
sign)
If it is necessary to configure the radar module, see
Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 |
RADAR DETECTION KIT INSTALL GUIDE
MX 200
Section
4.
LEVEL 4
10
|
carmanah.com