Carmelli NG1040 Manual Petunjuk Perakitan - Halaman 6

Jelajahi secara online atau unduh pdf Manual Petunjuk Perakitan untuk Aksesori Carmelli NG1040. Carmelli NG1040 11 halaman. Outlaw free standing dart cabinet

Halaman Cetak

ASSEMBLY INSTRUCTIONS (CONT.)

Step 3: Screw thread bolts #21 into cover plate #7 and side panel #6. Insert gears #20 into storage

shelves #9. Attach cover plate #7 and storage shelves #9 to side panel #6 with gear #20

4. Attach each LEG BRACE #5 to LEGS as shown with SMALL BOLT #8 and SMALL FLAT

as shown. Repeat for other side panel #6. Attach magnetic part #26 to pre-drilled holes on

WASHER #9. Feed wire leads through gasket, and carefully turn table over.

center of long side of board #7 with screw #28.

#26

5. Attach ELECTRONIC SCORER #11 with SCREW #16.

Step 4: Attach the bottom back board #10 to the assembled cabinet with screw #19.

Carefully attach 2 wire leads to

ELECTRONIC SCORER #11.

Insert the lead " A "

into the " A " receptacle.

Insert the lead " B "

into the " B " receptacle.

#28

#20

#21

#20

#21

#20

#21

#19

#10

Note: Finished edge will

face front and the gears

will be on the bottom of

all storage shelves.

#21

* Before turning the

table over, carefully

feed two wire leads

through gasket hole

in center of side panel.