Carmelli NG1040 Manual Petunjuk Perakitan - Halaman 7

Jelajahi secara online atau unduh pdf Manual Petunjuk Perakitan untuk Aksesori Carmelli NG1040. Carmelli NG1040 11 halaman. Outlaw free standing dart cabinet

Halaman Cetak

ASSEMBLY INSTRUCTIONS (CONT.)

Step 5: Attach the dart holder #12 using the pre-drilled holes on the door with screw #18.

Attach the doors #8 to the bottom cabinet with hinges #13 and screw #16 and screw #17.

Attach the legs #11 to the cabinet bottom with washer #15 and bolt #14. Note: see Step 7

4. Attach each LEG BRACE #5 to LEGS as shown with SMALL BOLT #8 and SMALL FLAT

if attaching to wall. Attach the door handles #22 to the doors. Attach the magnet steel plates

WASHER #9. Feed wire leads through gasket, and carefully turn table over.

#27 to pre-drilled holes on top outer corners on the inside of the doors with screw #29.

Step 6: Screw thread bolts #21 into the bottom cabinet and attach the top cabinet to the bottom

cabinet with gears #20 as shown below.

5. Attach ELECTRONIC SCORER #11 with SCREW #16.

Carefully attach 2 wire leads to

ELECTRONIC SCORER #11.

Insert the lead " A "

into the " A " receptacle.

Insert the lead " B "

into the " B " receptacle.

#29

#27

#12

#18

#22

#13

#16

#17

#11

#15

#14

#20

#21

#16

#11

#21

* Before turning the

table over, carefully

feed two wire leads

through gasket hole

in center of side panel.