DreamLED SPL-1000 Panduan Pengguna - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Lampu luar ruangan DreamLED SPL-1000. DreamLED SPL-1000 20 halaman. Solar path led light

Press the ON/OFF button 1x to activate the lamp. The lamp will turn ON automatically

at night (<30 LUX).

Press the ON/OFF button once again to turn OFF the lamp completely. The solar cells

will charge the battery without activating the lamp. Leave the lamp in this position for at

least 3 or 4 sunny days so the battery can be fully charged before using it.

MODE 1: DIM

Press this button to select mode 1. The lamp will turn ON automatically at night (<30

LUX) at 20% of full light and keeps on working till the morning time or till the battery is

empty.

MODE 2: FULL LIGHT + DIM

Press this button to select mode 2. The lamp will turn ON automatically at night (<30

LUX) at full light (100%) when motion is detected in the detection range. About 25

seconds after the last motion has been detected the lamp turns to 3% of full light and

keeps on working till the morning time or till the battery is empty.

MODE 3: FULL LIGHT + OFF

Press this button to select mode 3. The lamp will turn ON automatically at night (<30

LUX) at full light (100%) when motion is detected in the detection range. About 25

seconds after the last motion has been detected the lamp turns OFF.

CLEANING

Make sure the solar panel is kept dust free and clean. Clean it regularly (1x per month) with a

dry cloth and with warm, soapy water. Dirty solar panels may not fully charge the battery. This

can lead to premature aging of the battery and may result in unreliable operation of the device.

-5-