Bosch 300 Series Panduan Penggunaan dan Perawatan / Petunjuk Pemasangan - Halaman 31

Jelajahi secara online atau unduh pdf Panduan Penggunaan dan Perawatan / Petunjuk Pemasangan untuk Pengering Bosch 300 Series. Bosch 300 Series 40 halaman. Built-in wall ovens
Juga untuk Bosch 300 Series: Petunjuk Penggunaan Manual (40 halaman), Panduan Pengguna (21 halaman), Panduan Instalasi (6 halaman), Panduan Instalasi (36 halaman), Panduan Instalasi (32 halaman), Panduan Petunjuk Pengoperasian (50 halaman), Panduan Memulai Cepat dan Keselamatan (7 halaman), Panduan Instalasi (28 halaman), Panduan Memulai Cepat (7 halaman), Panduan Penggunaan dan Perawatan (32 halaman), Panduan Memulai Cepat dan Keselamatan (7 halaman), Panduan Servis (36 halaman), Panduan Memulai Cepat dan Keselamatan (13 halaman)

Rinse the heat exchanger and the cap on all sides with

a jet of water to completely remove all of the lint and

fluff.

Remove all lint and fluff from the seals on the dryer

and heat exchanger.

Allow the cap and the heat exchanger to dry fully.

First insert the heat exchanger, then the cap.

10.

Turn back both locking levers.

11.

Close the maintenance flap until it locks into position.

12.

Look in the Troubleshooting table to reset the

13.

maintenance indication.

~ Troubleshooting; Page 32

Cleaning the moisture sensors

The dryer is equipped with a stainless-steel moisture

sensor. The moisture sensor measures how damp the

laundry is.

After long periods of usage the moisture sensor may

become covered by a fine layer of limescale or residues

of detergents and textile care products. Such residues

must be removed regularly as the sensor function and in

consequence the drying result may be impaired.

To clean the moisture sensors:

Open the door.

The deposit on the sensors can easily be removed by

wiping the sensors (the two bars next to the lint filter)

with a cloth and a little white vinegar.

NOTICE: Use white vinegar only!

Clean the moisture sensors once a month.

If DR indicator lights up check the drain hose for kinks,

restrictions or blockage.

NOTICE: If DR indicator still lights up after the

maintenance, you should contact customer service or

your local dealer.