Bosch 300 Series Use And Care Manual / Installation Instructions - Page 31

Browse online or download pdf Use And Care Manual / Installation Instructions for Dryer Bosch 300 Series. Bosch 300 Series 40 pages. Built-in wall ovens
Also for Bosch 300 Series: Instructions For Use Manual (40 pages), User Manual (21 pages), Installation Manual (6 pages), Installation Manual (36 pages), Installation Manual (32 pages), Operating Instructions Manual (50 pages), Quick Start And Safety Manual (7 pages), Installation Manual (28 pages), Quick Start Manual (7 pages), Use And Care Manual (32 pages), Quick Start And Safety Manual (7 pages), Service Manual (36 pages), Quick Start And Safety Manual (13 pages)

Print Page

Rinse the heat exchanger and the cap on all sides with

a jet of water to completely remove all of the lint and

fluff.

Remove all lint and fluff from the seals on the dryer

and heat exchanger.

Allow the cap and the heat exchanger to dry fully.

First insert the heat exchanger, then the cap.

10.

Turn back both locking levers.

11.

Close the maintenance flap until it locks into position.

12.

Look in the Troubleshooting table to reset the

13.

maintenance indication.

~ Troubleshooting; Page 32

Cleaning the moisture sensors

The dryer is equipped with a stainless-steel moisture

sensor. The moisture sensor measures how damp the

laundry is.

After long periods of usage the moisture sensor may

become covered by a fine layer of limescale or residues

of detergents and textile care products. Such residues

must be removed regularly as the sensor function and in

consequence the drying result may be impaired.

To clean the moisture sensors:

Open the door.

The deposit on the sensors can easily be removed by

wiping the sensors (the two bars next to the lint filter)

with a cloth and a little white vinegar.

NOTICE: Use white vinegar only!

Clean the moisture sensors once a month.

If DR indicator lights up check the drain hose for kinks,

restrictions or blockage.

NOTICE: If DR indicator still lights up after the

maintenance, you should contact customer service or

your local dealer.