Aleo WPL2-80 Petunjuk Instalasi

Jelajahi secara online atau unduh pdf Petunjuk Instalasi untuk Peralatan Pencahayaan Aleo WPL2-80. Aleo WPL2-80 2 halaman. Led wall pack

Halaman Cetak
WPL2
Series
™
LED Wall Pack
Includes: WPL2-60, WPL2-80, WPL2-100, WPL2-120

InstallatIon InstructIons

rEaD anD FolloW all saFEtY InstructIons
WarnInG
FaIlurE to FolloW tHEsE InstructIons anD WarnInGs MaY rEsult In sErIous InJurY or DaMaGE to
ProPErtY
For your safety, thoroughly read these instructions and warnings in its entirety prior to installing or servicing this product. These
instructions do not attempt to cover all installation and maintenance circumstances. If you do not understand these instructions or
if additional information is needed, please contact Aleo Lighting customer service.
WarnInG
rIsK oF FIrE or ElEctrIc sHocK
This product must be installed and serviced by a
professional electrician in accordance with applicable
federal, state, and local laws, regulations, and
electrical code. If not qualified, do not attempt
installation of this product. Contact a qualified
electrician.
WarnInG
rIsK oF PErsonal InJurY
To prevent wiring damage or abrasion, do not expose wiring to edges of sheet metal or other sharp objects
Do not make or alter any open holes in any of the enclosures with wiring or electrical components during installation
saVE tHEsE InstructIons For FuturE rEFErEncE
WarnInG
This luminaire is made for permanant installation in ordinary (non-hazardous) locations in accordance with NEC
code and all applicable local and federal codes. Do not use in applications with limited ventilation or high ambient
temperature enclosures.
turn oFF PoWEr BEForE InstallInG
Electrical Connection
1.
Connect BLACK (line) driver lead to voltage supply Line
position (HOT).
2.
Connect driver WHITE lead to the NEUTRAL supply
position.
3.
Connect the GREEN ground lead to the supply ground
lead.
If using 0-10V dimming:
4.
Connect VIOLET lead to supply POSITIVE dimming lead.
5.
Connect GREY lead to the supply NEGATIVE dimming
lead.
If NOT using 0-10V dimming:
6.
Ensure VIOLET and GREY 0-10V dimming leads are
properly capped.
1 of 2
WarnInG
rIsK oF FIrE, ElEctrIc sHocK, or PErsonal InJurY
To avoid risk of electrical shock, turn off power before installing or
servicing.
Verify that supply voltage is correct by comparing with the input
voltage on the luminaire label
Make all electrical and ground connections in accordance with
NEC and any applicable code requirements
Wiring Diagram
Black (Line)
White (Neutral)
0-10V
Control Wires
Blue (-)
Red (+)
LED DRIVER
LED
Load