DREAMS Deacon bed Manual Petunjuk Perakitan

Jelajahi secara online atau unduh pdf Manual Petunjuk Perakitan untuk Perabotan Dalam Ruangan DREAMS Deacon bed. DREAMS Deacon bed 10 halaman. Solid/sprung slats
Juga untuk DREAMS Deacon bed: Manual Petunjuk Perakitan (7 halaman)

Halaman Cetak
DREAMS Deacon bed Manual Petunjuk Perakitan
Deacon bed
Assembly Instructions
NOTE: If you choose to purchase the
sleepmotion bed, please use this AI'
　
Before you
Start, here
are some
helpful
advices.
Revision number 1/1
BEFORE STARTING ASSEMBLY PLEASE REFER TO THE OWNERS MANUAL
SUPPLIED WITH YOUR SLEEPMOTION 200i BED BASE AND FOLLOW THE
INSTRUCTIONS TAKING NOTE OF ANY SAFETY PRECAUTIONS OR
OPERATIONAL SAFETY REQUIREMENTS OF THE INSTALLATION. BUILD THE
BED BASE FIRST USING ONLY THE EIGHT LONGER LEGS 6"(15cm),SEE
STAGE 1.IMPORTANT: PLACE THE BASE IN FINAL POSITION IN THE ROOM
OF USE, CONNECT THE POWER AND CHECK THE OPERATION THEN STEP
BY STEP FOLLOW THE BED ASSEMBLY INSTRUCTIONS BELOW, TO BUILD
THE BED AROUND THE SLEEPMOTION 200i BED BASE
1. We suggest you spend a short time reading through this leaflet and then follow
the simple step by step instructions.
2. If you follow the instructions carefully the end result should be worth the effort.
3. Do not discard any of the packaging until you have checked that you
have all the parts and the pack of fittings.
4. Assemble this product on a carpet.
5. To ensure an easier assembly, we strongly advise that all fittings are only
finger tightened during initial assembly. Only upon completion of the.
Assembly should all fixing points be fully tightened.
6. We recommend a periodic check on all fixing points to make sure they remain
fully tightened.
7. Keep glue and fittings out of children s reach.
In the unlikely event that this product has missing or damaged parts, please call
03442 920000 to obtain spares