Comnet CWFE2SCS2 Panduan Instalasi dan Pengoperasian - Halaman 6
Jelajahi secara online atau unduh pdf Panduan Instalasi dan Pengoperasian untuk Konverter Media Comnet CWFE2SCS2. Comnet CWFE2SCS2 12 halaman. Commercial grade 10/100 mbps ethernet 2 port electrical-to-optical media converter
Juga untuk Comnet CWFE2SCS2: Panduan Memulai Cepat (4 halaman), Panduan Instalasi dan Pengoperasian (10 halaman)
Halaman Cetak
LED Indicators
There are 6 diagnostic LEDs located on the Front panel of the media
converter. They provide real-time information of system and optional status.
The indicator includes Power, UTP 100, LK/ACT, FDX/COL, Fiber LK/ACT,
FDX/COL. The following table provides description of the LED status and
their meanings.
LED
PWR
100
LK/ACT
(UTP)
LK/ACT
(Fiber)
FDX/COL
(UTP)
FDX/COL
(Fiber)
Status
Meaning
Green
Power on
Green
100Mbps UTP Speed
OFF
10Mbps UTP Speed
Green
The unit is linking with its link partner.
The unit is transmitting or receiving packets from UTP
Blinks
devices.
Off
No device attached
Green
The unit is linking with the corresponding unit.
The unit is transmitting or receiving packets from FX
Blinks
devices.
Off
No device attached
Orange
The UTP port is operating in full-duplex mode.
Blinks
Collision of Packets is occurring in the port.
Off
Half-duplex mode or no device attached
Orange
The fiber port is operating in full-duplex mode.
Blinks
Collision of Packets is occurring in the port.
Off
Half-duplex mode or no device attached
4