Comnet CWFE2SCS2 Panduan Instalasi dan Pengoperasian - Halaman 8
Jelajahi secara online atau unduh pdf Panduan Instalasi dan Pengoperasian untuk Konverter Media Comnet CWFE2SCS2. Comnet CWFE2SCS2 12 halaman. Commercial grade 10/100 mbps ethernet 2 port electrical-to-optical media converter
Juga untuk Comnet CWFE2SCS2: Panduan Memulai Cepat (4 halaman), Panduan Instalasi dan Pengoperasian (10 halaman)
Halaman Cetak
Rear Panel
The rear panel contains a power socket, which accepts 8–24 VDC @ 220mA.
Cabling
For the Twisted-pair segment unshielded twisted pair (UTP) or shielded
twisted pair (STP) cabling can be used. The cable must comply with the
IEEE 802.3u 100Base TX standard for Category 5. The cable between
the converter and the link partner (switch, hub, workstation, etc.) must
be less than 100 meters (328 ft.) long.
For the single mode fiber optic segment, use 9/125 µm single mode
fiber cable. You can connect two devices over a distance of 30
Kilometers.
For the multimode fiber optic segment use 50 or 62.5/125 um
multimode fiber cable. You can connect two devices up to a 2-kilometer
(6,562 ft.) distance.
DC IN
6