Comnet CWFE2SCS2 Panduan Instalasi dan Pengoperasian - Halaman 7
Jelajahi secara online atau unduh pdf Panduan Instalasi dan Pengoperasian untuk Konverter Media Comnet CWFE2SCS2. Comnet CWFE2SCS2 10 halaman. Commercial grade 10/100 mbps ethernet 2 port electrical-to-optical media converter
Juga untuk Comnet CWFE2SCS2: Panduan Instalasi dan Pengoperasian (12 halaman), Panduan Memulai Cepat (4 halaman)
Halaman Cetak
INSTRUCTION MANUAL
Rear Panel
The rear panel contains a power socket, which accepts 5-12 VDC @ 2.7 W.
Connect the included Power Supply to the rear panel DC IN jack.
Plug the AC input of the Power Supply to a commercial power source.
Cabling
» For the Twisted-pair segment unshielded twisted pair (UTP) or shielded twisted pair (STP)
cabling can be used. The cable must comply with the IEEE 802.3u 100Base TX standard for
Category 5. The cable between the converter and the link partner (switch, hub, workstation,
etc.) must be less than 100 meters (328 feet) long.
» For the single mode fiber optic segment, use 9/125 μm single mode fiber cable. You can
connect two devices over a distance of 30 kilometers.
» For the multimode fiber optic segment use 50 or 62.5/125 µm multimode fiber cable. You can
connect two devices up to a 3 kilometer (2 mile) distance.
Connections
Ethernet
TECH SUPPORT: 1.888.678.9427
DC IN
Fast Fiber Converter Module - Rear Panel
Device
CAT5e
CWFE2SC
POWER
SUPPLY
CWFE2SC
2 Multimode
or Single Mode
Optical Fibers
CWFE2SC(M,S)2
Ethernet
Device
CAT5e
POWER
SUPPLY
QSG_CWFE2SC(M,S)2 Rev. 11.17.17 PAGE 7