Comnet CWFE2SCS2 Panduan Instalasi dan Pengoperasian - Halaman 8
Jelajahi secara online atau unduh pdf Panduan Instalasi dan Pengoperasian untuk Konverter Media Comnet CWFE2SCS2. Comnet CWFE2SCS2 10 halaman. Commercial grade 10/100 mbps ethernet 2 port electrical-to-optical media converter
Juga untuk Comnet CWFE2SCS2: Panduan Instalasi dan Pengoperasian (12 halaman), Panduan Memulai Cepat (4 halaman)
Halaman Cetak
INSTRUCTION MANUAL
Problem Solving
» Check the DIP-switch configuration. It must be set in the same operational mode as the
corresponding link.
» Select the proper UTP/fiber optic cable to construct your network. The single-mode media
converter must use single-mode fiber optic cable. Please check that you are using the right
cable.
Optical Fiber Specifications
The following table shows the optical Fiber Specification
Module Name
Wavelength (nm)
CWFE2SCM2
1310 nm
CWFE2SCS2
1310 nm
Module Name
Avg. Power Loss Budget (dBm) Max. FDX Fiber Distance (Km)
CWFE2SCM2
10 dBm
CWFE2SCS2
15 dBm
Optical Specifications of Transceivers
1310 nm
Multimode
Single Mode
TECH SUPPORT: 1.888.678.9427
Transmitter (Output Center Wavelength): 1261~1360 nm
Receiver (Wavelength of Operation): 1100~1600 nm
Avg. Launch Power (dB)
-20 dB
-15 dB
3 km
30 km
CWFE2SC(M,S)2
Avg. Sensitivity (dB)
-30 dB
-30 dB
Fiber Size (um)
62.5/125
50/125
9/125
QSG_CWFE2SC(M,S)2 Rev. 11.17.17 PAGE 8