Comnet FDX60S1B-M Panduan Instalasi dan Pengoperasian - Halaman 6
Jelajahi secara online atau unduh pdf Panduan Instalasi dan Pengoperasian untuk Transceiver Comnet FDX60S1B-M. Comnet FDX60S1B-M 9 halaman. Fdx60 series. single or dual rs232/rs422/rs485(2/4w) data transceiver
Halaman Cetak
INSTALLATION AND OPERATION MANUAL
FIGURE 9 – LED INDICATORS
LINK
GREEN
Unit In Sync
RED
Unit Not In Sync
OFF
No Optical Link
FIGURE 10 – SWITCH POSITIONS
Switch
Located on front panel in full
size modules and on back on
small size modules.
The first two switches set the
data type, the third toggles
Loop Back Test Mode.
TECH SUPPORT: 1.888.678.9427
DATA (TX/RX)
LOOP BACK (Test Mode)
Activity
Fiber Link Connections are Correct
No Acvitiy
Fiber Link Issue Exists (Head End)
–
Fiber Link Issue Exists (Far End);
OR Test Mode is Off
RS232 Data
1
2
RS485 2-Wire,
Sensornet Data
1
2
Loop Back
Test
1
2
POWER
Unit Powered Up
–
Unit Powered Down
3*
3*
3*
* Loop Back Test Mode
(see Page 8)
FDX60(M)(S)(-M)
RS422, Bi-Phase or
Manchester Data
1
2
3*
RS485
4-Wire Data
1
2
3*
INS_FDX60_REV–
04/23/10
PAGE 6