Andon KD-926 Panduan Pengoperasian - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Monitor Tekanan Darah Andon KD-926. Andon KD-926 19 halaman.

DN:KD-926-SMSY01 V1.0

—Consult the dealer or an experienced radio/TV technician for help.

17. Medical AC adapter which output is DC 6.0V 600mA and complied with IEC 60601-1/EN

60601-1/UL 60601-1 and IEC 60601-1-2/EN 60601-1-2/UL 60601-1-2 is suitable for this

monitor. Please note that the monitor jack size: hole Φ5.5mm, center pin Φ2.0mm. Please

pay attention to polarity.

18. Measurements are not possible in patients with a high frequency of arrhythmias.

19. The device is not intended for use on neonates, children or pregnant women. (Clinical

testing has not been conducted on neonates, children or pregnant women.)

20. Motion, trembling, shivering may affect the measurement reading.

21. The device would not apply to the patients with poor peripheral circulation, noticeably low

blood pressure, or low body temperature (there will be low blood flow to the measurement

position).

22. The device would not apply to the patients who use an artificial heart and lung (there will

be no pulse)

23. Consult your physician before using the device for any of the following conditions:

common arrhythmias such as atrial or ventricular premature beats or atrial fibrillation,

arterial sclerosis, poor perfusion, diabetes, pre-eclampsia, enal diseases.

SETUP AND OPERATING PROCEDURES

Prior to first use, download and install the Andon App from the App Store(iOS device) or

Google Play(Android device). Use keyword search terms "mHealth".

a. Open battery cover at the back of the monitor.

b. Load four "AA" size batteries. Please pay attention to polarity.

c. Close the battery cover.

When LCD shows battery symbol , replace all batteries with new ones.

Rechargeable batteries are not suitable for this monitor.

Remove the batteries if the monitor will not be used for a month or more to avoid

relevant damage of battery leakage.

Avoid the battery fluid to get in your eyes. If it should get in your eyes, immediately

rinse with plenty of clean water and contact a physician.

d. If you use the AC adapter, please make sure the monitor turn off or no batteries. Put

the connector plug of the adapter into the socket as the picture, Then plug the adapter

to AC outlet. When disconnect the AC Adapter:

Remove the AC Adapter from the electrical outlet;

Remove the AC Adapter plug from the monitor socket.

Do not plug or unplug the power cord into the electrical outlet with wet hands.

Do not overload power outlets. Plug the device into the appropriate voltage outlet.

If the AC adapter is abnormal, please change the adapter.

Do not pull out the adapter when you are using the monitor.

6/16

Operation Guide