Andon KD-926 Panduan Pengoperasian - Halaman 9

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Monitor Tekanan Darah Andon KD-926. Andon KD-926 19 halaman.

Halaman Cetak

DN:KD-926-SMSY01 V1.0

3.2 Table 1 instructs the conversion relations between 24 hour format and 12 hour

format.

24 hour format

0:00

1:00

2:00

3:00

4:00

5:00

6:00

7:00

8:00

9:00

10:00

11:00

4. CONNECTING THE CUFF TO THE MONITOR

Insert the cuff tubing connector into the air port in the side of the monitor.

Make sure that the connector is completely inserted to avoid air leakage

during blood pressure measurements.

Avoid compression or restriction of the connection tubing during measurement，

which may cause inflation error, or harmful injury due to continuous cuff pressure.

5. APPLYING THE CUFF

Pulling the cuff end through the medal loop (the cuff is packaged like

this already), turn it outward (away from your body) and tighten it and

close the Velcro fastener.

b. Place the cuff around a bare left arm 1-2cm above the elbow joint.

While seated, place palm upside in front of you on a flat surface

such as a desk or table. Position the air tube in the middle of your

arm in line with your middle finger.

d. The cuff should fit comfortably, yet snugly around your arm.You

should be able to insert one finger between your arm and the cuff.

Note:

 Please refer to the cuff circumference range in "SPECIFICATIONS" to make

sure that the appropriate cuff is used.

 Measure on the left arm each time.

Table 1

12 hour format

12:00 AM

1:00 AM

2:00 AM

3:00 AM

4:00 AM

5:00 AM

6:00 AM

7:00 AM

8:00 AM

9:00 AM

10:00 AM

11:00 AM

8/16

24 hour format

12:00

13:00

14:00

15:00

16:00

17:00

18:00

19:00

20:00

21:00

22:00

23:00

Operation Guide

12 hour format

12:00 PM

1:00 PM

2:00 PM

3:00 PM

4:00 PM

5:00 PM

6:00 PM

7:00 PM

8:00 PM

9:00 PM

10:00 PM

11:00 PM