Dremel 3D20 Idea Builder Panduan Memulai Cepat - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Printer 3D Dremel 3D20 Idea Builder. Dremel 3D20 Idea Builder 8 halaman. Unclogging
Juga untuk Dremel 3D20 Idea Builder: Panduan Memulai Cepat (2 halaman), Panduan Memulai Cepat (8 halaman), Panduan Memulai Cepat (4 halaman), Panduan Memulai Cepat (4 halaman), Panduan Memulai Cepat (2 halaman), Panduan Pemecahan Masalah (2 halaman), Panduan Memulai Cepat (2 halaman), Panduan Memulai Cepat (2 halaman), Panduan Memulai Cepat (2 halaman)

Halaman Cetak
Dremel 3D20 Idea Builder Panduan Memulai Cepat
7
Best Practices & Resources

BEST PRACTICES

1. ALWAYS USE BUILD TAPE.
2. Ensure your platform is level (before you begin building
your object).
3. Ensure spool is installed properly and can rotate freely.
4. When loading filament, allow Dremel 3D20 to extrude until
material is consistent with the installed filament color.
5. It is important to stay near your Dremel 3D20 during
operation and watch the Dremel 3D20 begin building
objects. (If a situation occurs, select the STOP icon right
away, to stop any further building).
6. Remove the build platform before removing the object.
7. Use object removal tool gently to avoid damaging the build
platform or object.

OPERATING ENVIRONMENT

Room Temperature: 16-29° C (60 - 85° F)
Level workspace
Dry workspace environment
19.1" (485mm)
13.2" (335mm)
3D20 RESOURCES
Quick Start Guide
In box and www.dremel3d.com
3D20 Website
www.dremel3d.com
3D20 Customer
1-844-4DRML3D
Support
(1-844-437-6533)
www.dremel3d.com
Dremel 3D20
Installed from www.dremel3d.com
Software
or from SD card provided with the
Dremel 3D20
WALL
8" (203mm)
8" (203mm)