Dremel 3D20 Idea Builder Panduan Memulai Cepat - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Printer 3D Dremel 3D20 Idea Builder. Dremel 3D20 Idea Builder 8 halaman. Unclogging
Juga untuk Dremel 3D20 Idea Builder: Panduan Memulai Cepat (2 halaman), Panduan Memulai Cepat (8 halaman), Panduan Memulai Cepat (4 halaman), Panduan Memulai Cepat (4 halaman), Panduan Memulai Cepat (2 halaman), Panduan Pemecahan Masalah (2 halaman), Panduan Memulai Cepat (2 halaman), Panduan Memulai Cepat (2 halaman), Panduan Memulai Cepat (2 halaman)

Building

BUILDING OUT OF THE BOX

1. On the main screen, tap the "Build" option. Then tap the

machine icon to select from pre-installed models.

2. Tap on the model file you would like to build and tap "Build".

3. Your Dremel 3D20 will align the extruder with the build

platform and will begin heating the extruder.

4. Once the build temperature is reached, your model will

begin to build.

5. Touch screen will display "Object Finished" . Tap the check

box to confirm. Wait until the touch screen indicates that

the extruder temperature is "COOL" .

REMOVING YOUR OBJECT FROM THE BUILD

PLATFORM

6. Wait for the extruder to cool before removing your object.

7. With the object still attached, remove build platform from

the build area.

8. Use your hand to peel your object from the build platform. If

needed, gently use the object removal tool to remove object

from build platform.