Andonstar AD206S Panduan Pengguna - Halaman 7
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Mikroskop Andonstar AD206S. Andonstar AD206S 11 halaman.
Buttons
①Power on/off
②Mode/Menu
③Up
④Down(image switching)
⑤OK/Start video record
⑥Picture capture
⑦Infrared sensor (when you are using the
Quick start
Lightly press and hold the Power button (Figure 8/① or power button of the switch cable) underneath
the display until the display turns on. (It may turn on automatically while connecting cables at the first
time,
and it's totally normal. )
*Troubleshooting
1. If the device is turned on and off repeatedly after starting up, please check if you press and hold the
power button.
2. If the display freezes,
such as an unfolded paperclip to depress the button located inside.
factory values and restarts the display. It does not erase saved images or video.
( Figure 8 Buttons )
locate the "reset " hole on the back of the monitor.
remote, please point the remote to this so
the device would response)
⑧Light controller
⑨Focus controller
⑩Endoscope
⑪Focusing pulley
⑫Endoscope bracket
5
Use a narrow object
This resets all settings to their