Andonstar AD206S Gebruikershandleiding - Pagina 7

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Andonstar AD206S. Andonstar AD206S 11 pagina's.

Buttons

①Power on/off

②Mode/Menu

③Up

④Down（image switching）

⑤OK/Start video record

⑥Picture capture

⑦Infrared sensor (when you are using the

Lightly press and hold the Power button (Figure 8/① or power button of the switch cable) underneath

the display until the display turns on. (It may turn on automatically while connecting cables at the first

time,

and it's totally normal. )

*Troubleshooting

1. If the device is turned on and off repeatedly after starting up, please check if you press and hold the

power button.

2. If the display freezes,

such as an unfolded paperclip to depress the button located inside.

factory values and restarts the display. It does not erase saved images or video.

（ Figure 8 Buttons ）

locate the "reset " hole on the back of the monitor.

remote, please point the remote to this so

the device would response)

⑧Light controller

⑨Focus controller

⑩Endoscope

⑪Focusing pulley

⑫Endoscope bracket

Use a narrow object

This resets all settings to their