dreo DR-HSH002 Panduan Pengguna - Halaman 11
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pemanas dreo DR-HSH002. dreo DR-HSH002 13 halaman. Ptc fan heater
Halaman Cetak
04
TROUBLESHOOTING
16
Troubleshooting
The following troubleshooting guide addresses the most
common problems. If problems persist, contact the Customer
Support at [email protected].
Codes on LED
PTC Fan Heater
Heater does not
Problem
Possible Causes
E2 - Temperature
sensor short circuit
E1 - Temperature
sensor open circuit
Malfunction
Display
FF - Overheat
Protection (Ambient
temperature above
122°F)
P4 - Tip-Over
Protection
Power cord is not
start
properly plugged in.
17
Solution
Unplug it from the
power source and
contact Customer
Support.
Unplug it from the
power source and
contact Customer
Support.
Unplug it from the
power source and
power it on again
when the ambient
temperature drops
below 122°F.
Place the heater back
on a flat, level and
stable surface.
Connect the plug to
a powered elec-trical
outlet.